Recent Progress on Nickel-Based Oxide/(Oxy)Hydroxide Electrocatalysts for the Oxygen Evolution Reaction

Developing clean and sustainable energies as alternatives to fossil fuels is in strong demand within modern society. The oxygen evolution reaction (OER) is the efficiency-limiting process in plenty of key renewable energy systems, such as electrochemical water splitting and rechargeable metal–air batteries. In this regard, ongoing efforts have been devoted to seeking high-performance electrocatalysts for enhanced energy conversion efficiency. Apart from traditional precious-metal-based catalysts, nickel-based compounds are the most promising earth-abundant OER catalysts, attracting ever-increasing interest due to high activity and stability. In this review, the recent progress on nickel-based oxide and (oxy)hydroxide composites for water oxidation catalysis in terms of materials design/synthesis and electrochemical performance is summarized. Some underlying mechanisms to profoundly understand the catalytic active sites are also highlighted. In addition, the future research trends and perspectives on the development of Ni-based OER electrocatalysts are discussed.     

Tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers as burning rate catalysts for ammonium perchlorate‐based propellant decomposition

Ferrocene‐based derivatives show potential application as burning rate catalysts (BRCs) for solid composite propellants. However, migration problems of simple ferrocene‐based derivatives limit their application as BRCs in solid composite propellants. To overcome the migration problems of ferrocene‐based BRCs and to enhance the burning rate of ammonium perchlorate (AP)‐based propellants, zero‐ to second‐generation tris(2‐aminoethyl)amine‐based ferrocene‐terminated dendrimers (G0, G1 and G2) were synthesized. The structures of G0, G1 and G2 were confirmed using ¹H NMR, Fourier transform infrared and UV–visible spectroscopies. The electrochemical behavior of G0, G1 and G2 was investigated using cyclic voltammetry. It was found that G0, G1 and G2 showed redox behavior due to the presence of ferrocene and this redox behavior was diffusion controlled over the investigated scan range. The burning rate catalytic effect of G0, G1 and G2 on thermal decomposition of AP was investigated using thermogravimetry and differential thermogravimetry. G0, G1 and G2 showed good catalytic effect on the thermal decomposition of AP. Anti‐migration studies showed that migration of G0, G1 and G2 was much slower than that of 2,2‐bis(ethylferrocenyl)propane (catocene) and ferrocene.     

Chiral Chromium Salen@rGO as Multipurpose and Recyclable Heterogeneous Catalyst

The first immobilization of a pyrene-tagged chromium salen complex through π-π noncovalent interactions on reduced graphene oxide (rGO) is described. A very robust supported catalytic system is obtained to promote asymmetric catalysis in repeated cycles, without loss of activity or enantioselectivity. This specific behavior was demonstrated in two different catalytic reactions (up to ten reuses) promoted by chromium salen complexes, the cyclohexene oxide ring-opening reaction and the hetero-Diels-Alder cycloaddition between various aldehydes and Danishefsky's diene. Furthermore, the chiral chromium salen@rGO has been found to be compatible with a multi-substrate type use, in which the structure of the substrate involved is modified each time the catalyst is reused.     

Propylene polymerization by C1‐symmetric {ONNO′}‐type salan zirconium complexes

The activities of C₁‐symmetric dibenzyl zirconium complexes of Salan ligands that bear a halo‐substituted phenolate ring and an alkyl‐substituted phenolate ring in propylene polymerization with methylaluminoxane as cocatalyst were studied. These {ONNO′}ZrBn₂‐type catalysts exhibited moderate‐to‐high activities and yielded polypropylene of low molecular weight. The degree of tacticity was found to depend on the steric bulk of the substituents on both phenolate rings and ranged from practically atactic to substantially isotactic (74–78% [mmmm] for polymerizations at room temperature by Lig⁵ZrBn₂). Hemi‐isotactic polypropylene was not obtained, despite the diastereotopicity of the two positions. The pattern of stereo errors was consistent with the enantiomorphic site control of propylene insertion typically observed for C₂‐symmetric catalysts and implied a facile site‐averaging mechanism. A regular 1,2‐insertion and a β‐H transfer to an incoming monomer correspond to the main propagation and termination processes, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Solvent Effect and Reactivity Trend in the Aerobic Oxidation of 1,3‐Propanediols over Gold Supported on Titania: NMR Diffusion and Relaxation Studies

In recent work, it was reported that changes in solvent composition, precisely the addition of water, significantly inhibits the catalytic activity of Au/TiO₂ catalyst in the aerobic oxidation of 1,4‐butanediol in methanol due to changes in diffusion and adsorption properties of the reactant. In order to understand whether the inhibition mechanism of water on diol oxidation in methanol is generally valid, the solvent effect on the aerobic catalytic oxidation of 1,3‐propanediol and its two methyl‐substituted homologues, 2‐methyl‐1,3‐propanediol and 2,2‐dimethyl‐1,3‐propanediol, over a Au/TiO₂ catalyst has been studied here using conventional catalytic reaction monitoring in combination with pulsed‐field gradient nuclear magnetic resonance (PFG‐NMR) diffusion and NMR relaxation time measurements. Diol conversion is significantly lower when water is present in the initial diol/methanol mixture. A reactivity trend within the group of diols was also observed. Combined NMR diffusion and relaxation time measurements suggest that molecular diffusion and, in particular, the relative strength of diol adsorption, are important factors in determining the conversion. These results highlight NMR diffusion and relaxation techniques as novel, non‐invasive characterisation tools for catalytic materials, which complement conventional reaction data.